New three cone angle technology:
The first cone angle squeezes the material forcefully to extrude the water inside the material;
The second cone angle dehydrates the solid phase and discharges the surface water of the solid phase;
The third cone angle allows the solid phase to be buffered and discharged smoothly.
Special spiral dynamic balancing device:
At present, the domestic screw dynamic balance can only achieve the dynamic balance of both sides in the initial state at low speed. The disadvantage of this dynamic balance is that the spiral will produce winding degree at high speed, and plastic deformation will occur over a long period of time. The spiral will be severely worn, resulting in Centrifuge The vibration increases and the performance decreases. The special spiral dynamic balance device can achieve dynamic balance on three sides, and can achieve dynamic balance at high speed (working speed), so that the winding degree of the spiral can be corrected in real time, and the stability of the spiral can be increased. Keep good effect for a long time.
BD baffle:
A baffle is set for the solid phase in the drum to improve the efficiency. The generation of dynamic pressure makes the sludge squeeze through the baffle plate and leave the centrifuge. The feeding screw is equipped with a BD plate to act as a baffle for the solid slag. However, the centrifuge is operated in a super liquid tank (above the level of the slag outlet). So as to compact the solid slag, which is conducive to the rolling action, so that the centrifuge can handle ultra-fine or gelled materials.
Application of wear parts:
All parts in contact with liquid are made of stainless steel, and some sensitive parts are additionally treated for corrosion and wear prevention. The feeding screw adopts special anti-corrosion measures, and is inlaid with hard alloy wear-resistant tile or welded with hard alloy wear-resistant protective layer.
Theoretical basis for large handling capacity:
1. Efficient three cone angle technology. The first cone angle is used to press the material forcefully to extrude the moisture inside the material; The second cone angle dehydrates the material and discharges the water on the surface of the material; The third cone angle can buffer and discharge materials smoothly, avoid material blockage and avoid troubles caused by water injection and shutdown flushing. At the same time, the length of the settling zone is lengthened, so that the effluent is clearer. The launch of this model Protein separation Technology has brought new breakthroughs, with clearer liquid phase, drier solid phase and greater processing capacity.
2. The liquid pool is deepened,
3. The straight drum is longer. Taking LW530-2120Y as an example, the total drum length of our new model is 120mm longer than that of similar models. The length of the same type of direct drum is 1500 mm Since we adopt a new three cone angle technology, our cone drum is nearly 200mm shorter than similar models. In this way, our new model's straight drum is 1820mm.
4. Add phase cleaning guide holes on the screw. Deepening the liquid pool and lengthening the straight drum can increase the settling time of materials Adding a phase cleaning guide hole on the screw can accelerate the phase cleaning discharge, reduce the residence time in the phase cleaning drum, make the drum space be effectively used, and greatly increase the handling capacity.
Greatly optimize the performance of the protein separation system to optimize the performance of the centrifuge.
Zhejiang Zhengda Environmental Protection Equipment Co., Ltd.: focusing on Horizontal spiral sedimentation centrifuge, sludge dewatering machine, sludge treatment equipment, centrifugal dewatering machine, sludge dewatering equipment, solid-liquid separation equipment, horizontal spiral centrifuge, centrifuge, mud dewatering machine, mud dewatering equipment, mud treatment equipment, horizontal centrifuge, solid-liquid separator Production, sales and service of various solid-liquid separation equipment. Welcome new and old customers to come for consultation and investigation.
Factory address: No. 812, Jiulong Street, Bihu Town Industrial Zone, Liandu District, Lishui City, Zhejiang Province Telephone: 0578-2788008 Fax ：0578-2788681
Email: zjzdhbsb@163.com website: //hcsxe.com
Mobile: 15857812218 (Mr. Mao) fifteen billion two hundred and fifty-seven million eight hundred and twenty-six thousand six hundred and nine (Manager Xu) thirteen billion nine hundred and six million seven hundred and eighty-eight thousand three hundred and sixty-seven (Mr. Xu)
