Industry information_page36_Zhejiang Zhengda Environmental Protection Equipment Co., Ltd - 上海花千坊_上海花千坊爱上海

Type of sludge dehydrator

2025-01-12 | View: 888

In addition to factors such as sludge properties, pH, flocculant concentration and temperature, it is also necessary to select appropriate flocculants according to the type of sludge dehydrator. At present, there are many types of sludge dehydrators on the market, such as centrifugal dehydrators, belt filter press dehydrators

Details>>

2025-01-12

The optimization and improvement of solid-liquid separation technology are discussed in view of the problem of aquaculture manure treatment?

We can further explore the optimization and improvement of solid-liquid separation technology for the treatment of breeding manure. The following are some suggestions: 1. Optimize the solid-liquid separation equipment: develop more advanced and efficient solid-liquid separation equipment, improve the separation effect, and reduce energy consumption - View: 631

2025-01-12

Main Methods of Wastewater Treatment in Printing and Dyeing Industry

At present, the main methods for the treatment of printing and dyeing industrial wastewater are physical methods. 1. Adsorption is the most widely used method in the physical treatment of industrial wastewater. This method is to mix the powder or particles of porous materials such as activated carbon and clay with industrial wastewater

2025-01-12

Structure of horizontal centrifuge

Horizontal centrifuge is a common solid-liquid separation equipment, which is mainly composed of drum, screw, differential system, liquid level baffle, drive system and control system. It uses the density difference between solid and liquid phases to accelerate the sedimentation of solid particles under the action of centrifugal force: 572

2025-01-12

The solid-liquid separator has four characteristics in application: applicability, advancement, durability and economy

The solid-liquid separator has four characteristics in application: applicability, advancement, durability and economy. Applicability: This series of machine has fast slag liquid separation speed, the water content of the separated fecal slag is 50-60%, the slag yield and water content can be adjusted, and the suitable browsing volume is 859

2025-01-12

Operation principle of centrifugal sludge dehydrator

Centrifugal sludge dewatering machine is a common sludge dewatering equipment, whose main components include drum, screw, differential system, liquid level baffle, drive system and control system. The centrifugal sludge dehydrator makes use of the density difference between the solid and liquid phases, and the centrifugal force browse volume is 628

2025-01-12

Safety Operation Procedures for Horizontal Screw Centrifugal Dehydrator

1、 Start preparation If the machine is started after the first operation or long-term shutdown (more than one month)- (2) Open the discharge port - View: 593

2025-01-12

High efficiency protein separation by ultracentrifugation with horizontal spiral centrifuge

Your company has advanced production technology of centrifugal separation equipment. The WL-650 horizontal spiral centrifuge produced by your company has high efficiency in protein separation. The following is some basic information and advantages about ultracentrifugation: 1. Ultracentrifugation is a basis - browse volume: 821

2025-01-12

Routine maintenance and repair of sewage treatment equipment for normal operation and extended service life of equipment

The daily maintenance of sewage treatment equipment is of great significance to the normal operation of equipment and the extension of service life. The following are some suggestions: 1. Establish a perfect equipment maintenance system: enterprises should develop and strictly implement the maintenance of equipment such as horizontal screw centrifuges - 800 views

2025-01-11

Introduction to Operation Process of Centrifuge

The centrifuge operation process is as follows: 1 Check the equipment site, confirm that there are no personnel and sundries, and inform the equipment to work and pay attention to safety. 2. Check the condition of the equipment, and check the tightness of the belt and the screws at each part. 3. Check the pipeline and confirm - browse volume: 897

previous page thirty-four thirty-five thirty-six thirty-seven thirty-eight next page