Processing swill-cooked dirty oil Three phase is used when Horizontal screw centrifuge It is a common method. Three phase horizontal snail Centrifuge It can realize the three-phase separation of oil, water and solid in trench oil, and separate oil, water and solid particles.

The following is used in the treatment of gutter oil Three phase horizontal screw centrifuge Several points for attention:

1. Adjust process parameters: according to the characteristics of gutter oil and processing requirements, adjust the speed, feeding speed, slag discharge speed and other process parameters of the centrifuge. Reasonable process parameters can improve the separation effect and treatment efficiency.

2. Pretreatment: The gutter oil usually contains a lot of impurities and solid particles. In order to avoid blocking and damage to the centrifuge, it needs to be pretreated. This may include filtering, impurity removal and other steps to minimize the impurities and solid particles in the gutter oil entering the centrifuge.

3. Regular maintenance and cleaning: In order to maintain the normal operation and long-term use of the centrifuge, the equipment needs to be cleaned and maintained regularly. Clean the separation chamber, filter cloth and other key parts in time to prevent accumulation and blockage.

4. Operation safety: When operating the three-phase horizontal screw centrifuge, it is necessary to follow the safety operation procedures. Operators need to be familiar with the safe operation process of the equipment, including wearing personal protective equipment correctly, paying attention to the rotation speed of the centrifuge and the use of the locking mechanism. Following the operating procedures can minimize the risk of accidents and personal injuries.

5. Treatment of waste residue and wastewater: The waste residue and wastewater generated during the treatment of gutter oil also need to be properly treated. Waste residue usually needs to be settled, solidified and disposed, and waste water can be discharged or recycled after treatment.

To sum up, attention should be paid to the above points when using a three-phase horizontal screw centrifuge to treat gutter oil. Reasonable adjustment of process parameters, proper pre-treatment, regular cleaning and maintenance of equipment, compliance with safe operating procedures, and proper treatment of waste residue and wastewater can ensure safe and efficient operation of the centrifuge, and achieve effective treatment and resource recovery of gutter oil.

Zhejiang Zhengda Environmental Protection Equipment Co., Ltd.: focusing on Horizontal spiral sedimentation centrifuge, sludge dewatering machine, sludge treatment equipment, centrifugal dewatering machine, sludge dewatering equipment, solid-liquid separation equipment, horizontal spiral centrifuge, centrifuge, mud dewatering machine, mud dewatering equipment, mud treatment equipment, horizontal centrifuge, solid-liquid separator Production, sales and service of various solid-liquid separation equipment. Welcome new and old customers to come for consultation and investigation.

Factory address: No. 812, Jiulong Street, Bihu Town Industrial Zone, Liandu District, Lishui City, Zhejiang Province Telephone: 0578-2788008     Fax ：0578-2788681
  Email: [email protected]      website: //hcsxe.com
Mobile: 15857812218 (Mr. Mao)    fifteen billion two hundred and fifty-seven million eight hundred and twenty-six thousand six hundred and nine (Manager Xu) thirteen billion nine hundred and six million seven hundred and eighty-eight thousand three hundred and sixty-seven (Mr. Xu)