Horizontal screw centrifuge It is a kind of equipment commonly used for slag liquid dehydration. It separates the solid particles in the slag liquid from the liquid by rotating the combination of the cylinder and the spiral knife plate.

Use horizontal snails Centrifuge The steps are as follows:

1. Preparation: check whether the equipment operates normally, and ensure that the inside of the machine is clean and the spiral knife plate is not damaged.

2. Adjust the operating parameters: according to the type and requirements of the slag liquid to be treated, adjust the operating parameters such as rotating speed, feeding amount and the switch position of the slag outlet. The adjustment of these parameters can be optimized according to the actual situation and needs.

3. Feeding: slowly inject the slag liquid to be treated into the feeding port of the horizontal screw centrifuge, and pay attention to controlling the feeding speed to avoid exceeding the processing capacity of the equipment.

4. Separation: The slag liquid passes through the rotating movement inside the centrifuge. Under the action of gravity and centrifugal force, the solid particles are pushed to the wall of the centrifuge, while the liquid is discharged through the internal screen.

5. Slag discharge: When the solid particles accumulate to a certain extent, open the slag discharge port to discharge the solid residues. Pay attention to control the speed of slag discharge so as not to affect the operation stability of the centrifuge.

6. Cleaning: After treatment, the horizontal screw centrifuge needs to be cleaned and maintained to ensure that the equipment can operate normally next time.

It should be noted that different types of slag liquid and equipment parameters may be different, so it is recommended to consult the equipment operation manual or consult professionals for more accurate instructions before use.

Zhejiang Zhengda Environmental Protection Equipment Co., Ltd.: focusing on Horizontal spiral sedimentation centrifuge, sludge dewatering machine, sludge treatment equipment, centrifugal dewatering machine, sludge dewatering equipment, solid-liquid separation equipment, horizontal spiral centrifuge, centrifuge, mud dewatering machine, mud dewatering equipment, mud treatment equipment, horizontal centrifuge, solid-liquid separator Production, sales and service of various solid-liquid separation equipment. Welcome new and old customers to come for consultation and investigation.

Factory address: No. 812, Jiulong Street, Bihu Town Industrial Zone, Liandu District, Lishui City, Zhejiang Province Telephone: 0578-2788008     Fax ：0578-2788681
  Email: [email protected]      website: //hcsxe.com
Mobile: 15857812218 (Mr. Mao)    fifteen billion two hundred and fifty-seven million eight hundred and twenty-six thousand six hundred and nine (Manager Xu) thirteen billion nine hundred and six million seven hundred and eighty-eight thousand three hundred and sixty-seven (Mr. Xu)